Computational Study on the Charge Transport and Optical Spectra of Anthracene Derivatives in Aggregates

A recent experiment [Angew. Chem. Int. Ed. 2017 , 56, 722–727] found that a (1 : 9) blend film of two anthracene derivatives, 2-fluorenyl-2-anthracene ( FlAnt ) and 2-anthryl-2-anthracence ( 2 A ), exhibit both efficient white light emission and high hole mobility, thus promising for organic light-emitting transistors (OLETs). Employing quantum chemistry at the polarizable continuum model (PCM) and the quantum mechanics/molecular mechanics (QM/MM) levels, we investigated the excited-state structures, optical spectra, band structure and the carrier mobility for FlAnt and 2 A from solution to aggregate phases. We suggest using the ratio of intermolecular excitonic coupling J and intramolecular excited state relaxation energy E to judge the bathochromic shift in optical emission in aggregates. For FlAnt , ρ=J/E is calculated to be less than 0.17, a critical value we identified earlier, and the spectra in solution and aggregate phases present quite similar features (blue emission). However, ρ is ∼0.5 for 2 A systems, and the calculated emission in the aggregate phase exhibits a remarkable bathochromic shift. In addition, the 0–0 emission is strongly suppressed in the herringbone stacking. These observations justify the experimental findings that (i) 2 A is blue emissive in solution but yellow-green in the aggregate phase, whereas FlAnt is always blue, and (ii) the blend of them show white emission. By using the “quantum nuclear tunneling” model we proposed earlier, we found the hole mobility for FlAnt and 2 A are 0.5 and 4.2 cm² V⁻¹ s⁻¹, respectively, indicating both are good hole transport materials.     

Can (H2O) n (n = 1–2) as effective catalysts in the CH2OO + H2S reaction under tropospheric conditions?

The addition reaction of CH₂OO?+?H₂S → HSCH₂OOH without and with catalyst X (X?=?H₂O and (H₂O)₂) has been investigated by CCSD(T)-F12a/VTZ-F12//B3LYP/aug-cc-pVTZ method and canonical variational transition state theory with small curvature tunneling correction. When H₂O was introduced in the CH₂OO?+?H₂S reaction, it not only acts as a catalyst for producing HSCH₂OOH, but also plays as a reactant to forming HOCH₂OOH. The formation channel of HSCH₂OOH is more important than the formation channel of HOCH₂OOH with its calculated rate constant larger by 11.0–43.2 times within the temperature 280–320?K. Then, (H₂O)₂ catalysed CH₂OO?+?H₂S → HSCH₂OOH reaction has been taken into account with its rate lower 1.9–4.2 times than the reaction of CH₂OO?+?H₂S → HSCH₂OOH with water. Also, CH₂OO?+?H₂S with H₂O cannot compete with the CH₂OO?+?H₂S reaction without water. This is different from CH₂OO?+?(H₂O)₂ reaction, which is about 4 orders of magnitude larger than the rate constant for CH₂OO?+?H₂O reaction. Such discrepancy is possible because C(CH₂OO)···O(H₂O) interaction has been enhanced more obviously by H₂O as compared to that of C(CH₂OO)···O(H₂S) interaction.     

Anisotropic phononic crystal structure with low-frequency bandgap and heat flux manipulation

This study presents a two-dimensional phononic crystal with heat flux manipulation and wide bandgaps of out-of-plane modes within the low-frequency range. The anisotropic matrix made of spiral-multilayered materials with different thermal conductivities, and the coating layer inserted with metal are designed for heat flux manipulation. Rubber-coated metal cylinders are periodically embedded in the anisotropic matrix to obtain the low-frequency bandgaps of out-of-plane modes. Numerical simulation is carried out to validate the heat and elastic characteristics of the spiral-multilayered anisotropic structure and reveal the effects of the laying angle and temperature on the bandgaps. Subsequently, a spiral-multilayered plate with periodic structures is studied, which shows an obvious vibration attenuation in the frequency ranges of the bandgaps and a deflected heat flux from the initial propagation direction. In the experimental investigation, the multi-phase spiral-multilayered anisotropic plate is simplified to a single-phase anisotropic plate made of aluminum. The characteristics of this type of anisotropic phononic crystal structure may pave the way for the design of a new kind of thermo-acoustic metamaterial serving in combined thermal and acoustic environments.     

An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

A DFT study on mechanisms of CO2 coupling with propargylic alcohols using alkali carbonates

The mechanisms of CO₂ coupling with the propargylic alcohol using alkali carbonates M₂CO₃ (M = Li, Na, K, Cs) have been investigated by means of density functional theory calculations. The calculations reveal that the target product tetronic acid (TA) is yielded through two stages: (a) the formation of the α-alkylidene cyclic carbonate (αACC) intermediate via Cs₂CO₃-mediated carboxylative cyclization of the propargylic alcohol with CO₂, and (b) the conversion of the αACC intermediate with Cs₂CO₃ to produce the cesium salt of the TA. Since the overall kinetic barriers for the two stages are comparable and affordable, the excellent chemoselectivity to the TA should be primarily originated from the high thermodynamic stability of the cesium salt of the TA. Moreover, relative to the TA, the possibility to yield the by-product acyclic carbonate can be excluded due to the both kinetics and thermodynamic inferiority. This result is different from the organic base-mediated reaction. Alternatively, our calculations predict that CsHCO₃ together generated with the cesium salt of the TA might also be an available mediating reagent for the incorporation of CO₂ with the propargylic alcohol. Compared to other alkali carbonates M₂CO₃ (M = Li, Na, K), the stronger basicity of Cs₂CO₃ and the lower ionic potential of cesium ion can raise the effective concentration of the αACC intermediate, and thus the conversion of the αACC intermediate into the cesium salt of the TA can be achieved with high yield.     

Efficient synthesis of branched poly(acrylic acid) derivatives via postpolymerization modification

The utility of pentafluorophenyl esters for the selective introduction of functional units and branch points in well-defined poly(acrylic acid) (PAA) derivatives is demonstrated using a combination of controlled radical polymerization and postpolymerization modification. Reversible addition-fragmentation chain transfer enables the synthesis of well-defined copolymers—poly(pentafluorophenyl acrylate-co-tert-butyl acrylate)—with the active ester repeat units serving as attachment points for reaction with primary amines, specifically tris(2-(t-butoxycarbonyl)ethyl)methyl amine (Behera's amine). Deprotection using trifluoroacetic acid removes both the backbone and side chain t-butyl esters to give a series of branched PAA derivatives containing novel tricarboxylic acid side chains that are well suited to complexation and multidentate interactions. Surprisingly, the active ester homopolymer is shown to have the highest reactivity with Behera's amine when compared to copolymers with lower incorporation of pentafluorophenyl esters, suggesting an intriguing interplay of neighboring group effects and steric interactions. The ability to tune the efficiency of postpolymerization modification gives a library of PAA derivatives.     

Two-Dimensional Germanium Sulfide Nanosheets as an Ultra-Stable and High Capacity Anode for Lithium Ion Batteries

Lithium ion batteries (LIBs) at present still suffer from low rate capability and poor cycle life during fast ion insertion/extraction processes. Searching for high-capacity and stable anode materials is still an ongoing challenge. Herein, a facile strategy for the synthesis of ultrathin GeS₂ nanosheets with the thickness of 1.1 nm is reported. When used as anodes for LIBs, the two-dimensional (2D) structure can effectively increase the electrode/electrolyte interface area, facilitate the ion transport, and buffer the volume expansion. Benefiting from these merits, the as-synthesized GeS₂ nanosheets deliver high specific capacity (1335 mAh g⁻¹ at 0.15 A g⁻¹), extraordinary rate performance (337 mAh g⁻¹ at 15 A g⁻¹) and stable cycling performance (974 mAh g⁻¹ after 200 cycles at 0.5 A g⁻¹). Importantly, our fabricated Li-ion full cells manifest an impressive specific capacity of 577 mAh g⁻¹ after 50 cycles at 0.1 A g⁻¹ and a high energy density of 361 Wh kg⁻¹ at a power density of 346 W kg⁻¹. Furthermore, the electrochemical reaction mechanism is investigated by the means of ex-situ high-resolution transmission electron microscopy. These results suggest that GeS₂ can use to be an alternative anode material and encourage more efforts to develop other high-performance LIBs anodes.     

On the Relative Twist Formula of l-adic Sheaves

We propose a conjecture on the relative twist formula of l-adic sheaves, which can be viewed as a generalization of Kato—Saito's conjecture. We verify this conjecture under some transversal assumptions. We also define a relative cohomological characteristic class and prove that its formation is compatible with proper push-forward. A conjectural relation is also given between the relative twist formula and the relative cohomological characteristic class.     

Artematrovirenolides A—D and Artematrolides S—Z,Sesquiterpenoid Dimers with Cytotoxicity against Three Hepatoma Cell Lines from Artemisia atrovirens

Inspired by the intriguing structures and remarkable activities of sesquiterpenoid dimers,12 new sesquiterpenoid dimers,artematrovirenolides A—D(1—4)and artematrolides S—Z(8—12),were isolated from the EtOAc fraction of Artemisia atrovirens through a bioactivity-guided approach.Their structures were elucidated by comprehensive spectroscopic data and absolute configuration was assigned based on single crystal X-ray diffraction data and ECD calculations.Structurally,all compounds are presumably formed via[4+2]cycloaddition involving three connecting model.Compounds 1—4 are four novel hetero-dimeric[4+2]Diels-Alder adducts dimerized from a rotundane-type unit and a guaiane-type monomer,and compounds 5—12 are eight new homo-dimeric[4+2]adducts derived from two guaianolide moieties.A putative biosynthetic pathway for compounds 1—4 was also proposed.Compounds 4,6,7,and 10 demonstrated moderate cytotoxicity against HepG2,SMMC-7721,and Huh7 cell lines with IC50 values ranging from 9.3 to 62.3μmol/L.Interestingly,compounds 5 and 11 manifested cytotoxicity with IC50 values of 13.6 and 12.8(HepG2),18.5 and 13.1(SMMC-7721),and 16.5 and 19.4μmol/L(Huh7),respectively,which were equivalent to the positive control,sorafenib.This investigation suggests that compounds 5 and 11 might be considered as potent antihepatoma candidates and deserve further structural modification and mechanism study.